Griven's Gobo Projectors Sends Your Logo on the Go
For outdoor projectors and color changers, there is simply no match for Griven. Griven’s gobo projectors, like their outdoor color changers, search lights, and promotional projectors are unmatched in their quality, power, and durability. The Goboclip, Gobostorm, and Gobostorm Plus gobo projectors will project your logo with unmatched brilliance will give your business the attention it deserves. Griven’s Goboclip MK3, Gobostorm, and Gobostorm Plus represent the cream of the gobo projector crop, in this article I will go through some of the key features that make Griven’s gobo projectors great.
The Goboclip comes ready to brave the elements with an IP rating of 65 and a compact and light weight aluminum with a scratch resistant grey coating that allows the Goboclip to remain inconspicuous. The 200w Goboclip uses either a 150w CDM-SA/T 150 metal halide lamp or a 150w HSD 150 metal halide lamp. There are two main differences between these two lamps, the CDM-SA/T150 has an output of 12,900lm and a color temperature 4,200K while the HSD lamp has a slightly lower light output at 12,000lm but has a cooler color temperature at 7,000K. The Goboclip zoom and focus can be adjusted manually, thus allowing you to change the beam angle from anywhere between 19° and 30°. The Goboclip can be controlled in a stand alone mode by using the electronic display at the back of the projector, or it can be used with a DMX controller. The Goboclip is designed so you can be as flexible as you want not only with regard to adjustable beam angle and method of control, but also regarding changing your glass or metal gobos. With the removal of two screws, the entire front of the projector lifts up, allowing you to easily swap in and out gobos and dichroic filters to get your projection perfect.
The 750w Gobostorm is the bigger sibling of the Goboclip. The Gobostorm uses either an MSD or MSR 575w metal halide lamp to ensure that the image being projected can been clearly and at substantial distances. The MSD 575 features a light output of 42,000lm and a color temperature of 6,000K compared to the MSR 575’s 49,000lm output and 7,200K color temperature. The MSD however, has a signficatnly longer life hour rating at 3,000hrs compared to the MSR’s 1,000 life hour rating. The Gobostorm features even more optical variability than the Goboclip with a manually adjustable beam angle of between 10° and 20° via the zoom and focus adjustment. The Gobostorm features the same IP65 rating and die cast aluminum exterior, but also an advanced convection cool system to keep the projector working its best. The Gobostorm shares with the Goboclip its control options as well as convenient and easy access for changing its dichroic filters and gobos. In addition to all of the features of the Gobostorm, the Gobostorm plus has a series on board effects including a mechanical dimmer, a strobe, and special effects (three prisms, five prisms, distortion and frost filters).
The Goboclip and Gobostorm series are among the best outdoor gobo projectors available. Their versatility and durability make them an unbeatable tool for outdoor promotions. BulbAmerica has all of Griven gobo projectors plus more! Check it out.
The Goboclip comes ready to brave the elements with an IP rating of 65 and a compact and light weight aluminum with a scratch resistant grey coating that allows the Goboclip to remain inconspicuous. The 200w Goboclip uses either a 150w CDM-SA/T 150 metal halide lamp or a 150w HSD 150 metal halide lamp. There are two main differences between these two lamps, the CDM-SA/T150 has an output of 12,900lm and a color temperature 4,200K while the HSD lamp has a slightly lower light output at 12,000lm but has a cooler color temperature at 7,000K. The Goboclip zoom and focus can be adjusted manually, thus allowing you to change the beam angle from anywhere between 19° and 30°. The Goboclip can be controlled in a stand alone mode by using the electronic display at the back of the projector, or it can be used with a DMX controller. The Goboclip is designed so you can be as flexible as you want not only with regard to adjustable beam angle and method of control, but also regarding changing your glass or metal gobos. With the removal of two screws, the entire front of the projector lifts up, allowing you to easily swap in and out gobos and dichroic filters to get your projection perfect.
The 750w Gobostorm is the bigger sibling of the Goboclip. The Gobostorm uses either an MSD or MSR 575w metal halide lamp to ensure that the image being projected can been clearly and at substantial distances. The MSD 575 features a light output of 42,000lm and a color temperature of 6,000K compared to the MSR 575’s 49,000lm output and 7,200K color temperature. The MSD however, has a signficatnly longer life hour rating at 3,000hrs compared to the MSR’s 1,000 life hour rating. The Gobostorm features even more optical variability than the Goboclip with a manually adjustable beam angle of between 10° and 20° via the zoom and focus adjustment. The Gobostorm features the same IP65 rating and die cast aluminum exterior, but also an advanced convection cool system to keep the projector working its best. The Gobostorm shares with the Goboclip its control options as well as convenient and easy access for changing its dichroic filters and gobos. In addition to all of the features of the Gobostorm, the Gobostorm plus has a series on board effects including a mechanical dimmer, a strobe, and special effects (three prisms, five prisms, distortion and frost filters).
The Goboclip and Gobostorm series are among the best outdoor gobo projectors available. Their versatility and durability make them an unbeatable tool for outdoor promotions. BulbAmerica has all of Griven gobo projectors plus more! Check it out.
Stay in Touch